Anilha de bloqueio - Padrão HEICO-LOCK® M18 x 29mm
Anilha de bloqueio - Padrão HEICO-LOCK® M18 x 29mm
S.150478
Peso: 0.01kg
The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems. HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads. Certified system for securing bolts, working at low and high preload levels Particularly suitable for dynamic loads – including when using lubricants Can be re-used Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels Particularly suitable for dynamic loads – including when using lubricants Can be re-used Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsVer Especificações Do Produto
Ver Adequados ParaVer Números De Peças OEM
Produtos Relacionados
Especificações Do Produto
Aplicavel Em Marca/Modelo
Referencia Original
Páginas De Catálogo
Especificações Do Produto
Especificações
The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems. HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads. Certified system for securing bolts, working at low and high preload levels Particularly suitable for dynamic loads – including when using lubricants Can be re-used Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels Particularly suitable for dynamic loads – including when using lubricants Can be re-used Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
HEICO
Acabamento
through-hardened, zinc flake coated
Cor
Prata
Diametro externo (mm)
29
Diametro interno (mm)
19.5
DIN or Standard No.
DIN 25201
erp_barcode_128
S.150478
erp_barcode_ean13
5045161504788
Espessura (mm)
3.6
Marca
HEICO
Material
Aço 1.1191/C45E
Quantidade na caixa
100 pcs.
Tamanho da rosca
M18
Tariff Code
7318220098
Tipo de anilha
Locking washer - Standard
Aplicavel Em Marca/Modelo
Aplicavel Em Marca/Modelo
Este produto não está associada a nenhuma marca e modelo em especial
Referencia Original
Referencia Original
Este produto não está associado a nenhum número de peça OEM em particular
Páginas De Catálogo
Páginas De Catálogo
Este produto não se encontra em nenhum catalogo impresso da Sparex
