Anilha de bloqueio - Padrão HEICO-LOCK® M8 x 13.5mm

Especificações

The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems.
HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads.
Certified system for securing bolts, working at low and high preload levels
Particularly suitable for dynamic loads – including when using lubricants
Can be re-used
Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels
Particularly suitable for dynamic loads – including when using lubricants
Can be re-used
Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts

Acabamento

through-hardened, zinc flake coated

Cor

Prata

Diametro externo (mm)

13.5

Diametro interno (mm)

8.6

DIN or Standard No.

DIN 25201

erp_barcode_128

S.150472

erp_barcode_ean13

5045161504726

Espessura (mm)

2.6

Marca

HEICO

Material

Aço 1.1191/C45E

Quantidade na caixa

200 pcs.

Tamanho da rosca

M8

Tariff Code

7318220098

Tipo de anilha

Locking washer - Standard

Aplicavel Em Marca/Modelo

Este produto não está associada a nenhuma marca e modelo em especial

Referencia Original

Este produto não está associado a nenhum número de peça OEM em particular

Páginas De Catálogo

Este produto não se encontra em nenhum catalogo impresso da Sparex